You don’t need to exit the vehicle. Operate switch (turn on dipped headlights and ignition if necessary). Check warning light is on. Explain that you would use them if visibility is reduced to below 100m. 11.
Tell me how you’d switch on the rear fog light (s) and explain when you’d use it/them. You don’t need to exit the vehicle. Operate switch (turn on dipped headlights and ignition if necessary). Check warning light is on. Explain use. 11. Tell me how you switch your headlight from dipped to main beam and explain how you’d know the main beam is on.
Can you show me how you would switch on the rear fog lights and explain when you would use it/them?
I would switch on the fog light(s) when visibility is low, such as when it is snowing, it’s foggy, or when I can’t clearly see the road ahead.
When you see the brake lights of the car in front of you come on, it is an indication that the driver in front is about to slow down or stop. This will give you enough time to slow down or stop as well.
The rear fog light (or fog lights) are used when visibility is low (e.g. fog, heavy rain, sandstorm) and can be used to illuminate a larger area in front of the vehicle, allowing the driver to see more of the road ahead.
I would first make sure that the rear fog light(s) are turned off, then I would pull the cover off the driver’s side to expose the switch. Next, I would pull the switch out and rotate it to the position where the fog light(s) are activated.