Lg Washer Error Code E6

LG Washer Error Code E6

If the LG Washer display error code E6, it may not start in any mode.

What caused the error E6?

The error is not common in most washer models. It occurs only in top-loading washing machines. It to the error, the device will fail to run the selected program for the reasons. This include;

  • overheated engine;
  • a stuck object that prevents the drum from spinning.

It is usually associated with increase in the temperature of the electric motor.

How to solve the problem at home?

  • Sometimes an alarm can be false, so you need to start with a reboot. Unplug the cord, allow the machine to stand for about 10 minutes, turn on the power again. If the electronics fail, everything will be solved by itself and the E6 error will disappear.
  • The next step is to check the tank. If a foreign object is stuck in it, it means it prevents the drum from rotating normally. Inspect the inside and remove jammed items. Pay particular attention to the water openings and bottom clearance: they may include hairpins, invisibles, paper clips, buttons, and so on.
  • Another measure is equipment shutdown. Just wait about 1 hour for the engine to cool, and then try a test run. If the error code E6 is connected precisely with the overheating of the motor, it will disappear as soon as the unit cools down.

Qualified repair

If the above measures could not help, Then, you can resolve the issue by inspecting the following parts.

Debug wiring

At a time, LG washers will display the error code due to poor transmission of signal. This can be the case if the electrical circuit is disturbed or violated. To restore the normal working of the device, twist, solder and insulate the broken wires. Also, insert the terminals into the groove firmly.