An LG dishwasher with an E1 error code implies that the system is leaking. Basically, this error code is seen to be similar to the AE error code, and this makes it perplexing to know how the two errors are related. Technically, the sole difference between the two errors is that one occurs in modern appliances, and the other occurs in the traditional LD dishwasher appliances. That said, it is critical to evaluate water leakage and get to know the prime causes of these errors.
Table of contents
Understanding error code E1
Sometimes, people don’t recognize water leakage in their dishwaters. However, if you check closely to the special tray situated under the appliance, you’ll find an accumulated amount of water. Thus, if error code E1 occurs, the control board receives a signal from the sensor, and that’s how the error code E1 shows up.
What to confirm in case the error code E1 shows up
- Inaccurate dishwasher installation
- Tank break
- Door leakage
- Improper pipes connections
- Disseminate pump, pump set, and other objects
- If you come across any of these issues, here is a guide on how to fix it
Fixing a door leakage
Leakage of water from the door is a common issue. The issue can simply be fixed by opening the door and get rid of the used sealing gun manually. Use another sealing gum that is appropriate for LG models. How do you insert the new sealing gum? Well, use your hands and have it exactly where you removed the old one. Just in case it is long, consider resizing it with the scissors to fit perfectly.
Fixing pipes and hoses
Basically, having clogged drainage and sewer systems is the prime cause of leakage in your dishwater. That said, it is important always to consider checking and cleaning the hoses and filters regularly. Get rid of the leftover food, have the glass unscrewed, and consider washing the area under running water. To affirm the connection and tightness of the hoses and pipes, consider having a look at the appliance inside.
Fixing water sensors and valves
Fixing the sensors and valves requires you to inspect them. In case you find rust on their surface, it is an indication to replace them. In the case of a water sensor, it is situated around the pallet. If water leaks, the valves will either screw up or fails. If the leak allows a lot of water, then it is time to get rid of the sensor.
Fixing a tank break
The bursting of the tank happens but in rare cases. It usually happens when the appliance has been used perhaps for a long time or a possible manufacturing malfunction. In the case of tank bursting, the sole option is always purchasing a new appliance because considering repairing requires a lot of cash.